Get a different, stylish and useful bookmark with the Magnet bookmark. Although magnet bookmarks have been around for years, they have gained popularity and become more visible in the last couple of years. The logic in the production of magnet bookmarks is based on the creation of a gripper effect by holding together the magnet pieces placed on the two lower sides of the image. The trick of the production of magnet bookmarks is that the layer magnets to be pasted on both sides of the image catch each other in the opposite direction. In sheet magnets, the holding power of two magnets cut in the same direction is not much. A more effective holding power is obtained if the two pieces are cut opposite each other (in the waterway) and placed opposite each other. Thus, a good magnet bookmark can be obtained.
The product we recommend in the production of magnet bookmarks is 0.5 mm adhesive magnet.
Dimension for 0.5 mm thick adhesive magnet:
• It is 60 cm x 100 cm.
For detailed information about 0.5 mm thick adhesive magnets (see: 0.5 mm adhesive magnet)
You can contact Magnet Wholesale to buy wholesale magnets or get information.
